Bend GenieSoftware selection / 3 min read
Choosing tube and pipe bending layout software
Evaluate software against a real part: geometry, dimension references, material, tooling, and the information your operator needs.
Read the guide →Bend Genie / Buyer’s Guide
Better questions.
Before the bend.
A working reference for fabricators choosing software and preparing real tube and pipe jobs. Start with the drawing. Keep the shop in view.
See what Bend Genie does →05 practical guides / No shortcuts to validationUpdated October 14, 2026
Shop handoff / 3 min read
From a drawing to LRA shop instructions
Build a reviewable sequence by agreeing on dimensions, entering the geometry, and documenting the setup before the first test bend.
Read the guide →Pre-production review / 3 min read
Catch avoidable rework before the first bend
Use a deliberate geometry, material, and tooling review to surface mismatches early—without mistaking a software estimate for a validated setup.
Read the guide →Repeatable preparation / 3 min read
Planning handrails and repeat fabrication jobs
Use templates and saved parts as controlled starting points, then review site dimensions, revisions, tooling, and the first fabricated part.
Read the guide →Process and tooling / 3 min read
Rotary draw or roll bending? Plan for the machine, too
Understand the process distinction, then review radius, tooling, grip length, and physical clearance before committing to a bend sequence.
Read the guide →From planning to proof
Start your 30-day trial →Bring a real part to the workspace.
Start a 30-day trial with email verification. Review geometry, dimensions, material, and tooling in Bend Genie, then validate the setup with your operator and test bends.